Canada Line

One of the highest-profile infrastructure  improvements to Vancouver in preparation for the 2010 Olympic Winter Games


  • Vancouver, British Columbia, Canada


  • TransLink

Project Status

  • Completed in 2009

Canada Line, Vancouver’s new rapid transit system was a $2 billion project. Connecting downtown Vancouver with the international airport and the city of Richmond, the line is distinct from general traffic, with track that is either below grade or elevated.

We provided the civil, structural, mechanical, and electrical engineering for a selection of key line stations at Bridgeport, Marine Drive, City Centre, and Yaletown, and full conceptual engineering for all 17 stations on the line, including five deep tunnel stations, five shallow tunnel stations, and seven above grade elevated stations. In providing these services we contributed to a project that was completed on budget and three months ahead of schedule.

The schedule and delivery method of the Canada Line was to suit the Winter Olympics, a major international sporting event. This imposed additional scheduling and design demands as the stations needed to be fully commissioned without delay, and immediately provide world class service for the attendees of this major event.

17 17
Elevated stations
7 7
Deep tunnel stations
5 5

A New Rapid Transit System on Time for the Olympics

Station designs incorporated as much local material as possible, including extensive use of wood. Above ground stations were designed with an open-air concept, which negated the need for much mechanical and glazing, and maximized natural light.

From deep tunnel stations, shallow tunnel stations and elevated stations, the design of a transportation system is a highly complex project. Each included exit studies, platform sizing calculations, station, concourse and grade level capacity studies, transit oriented development studies and intermodal bus loops. The line spans two municipal authorities and travels through widely differing urban and suburban contexts, and construction included bored tunnelling and cut and cover through dense urban environments with commercial and residential surroundings.

Canada Line, Vancouver